|
|
Build Your Online Product Catalogs?
| Product Name: |
RTV molding silicone rubber for plaster products
|
| Supply Ability: |
8000kg |
| Related proudcts |
molding silicone, rtv, rtv molding silicone, |
| Specifications |
RTV molding silicone rubber for plaster products with 30 shore A |
| Price Term: |
FOB |
| Port of loading: |
shenzhen |
| Minimum Order |
200kg |
| Unit Price: |
6.88-8.98USD |
|
RTV molding silicone rubber for plaster products feature:
(1) RTV molding silicone rubber for plaster products with SGS and ROSH approval
(2) Curing agent arrange together as free charged
(3) In liquid form and in various colors
(4) With an exceptional fluidity and good operability.
(5)Temperature and deformation resistance as well as low shrinkage.
(6) High duplication times.
(7) Sample orders are available
RTV molding silicone rubber for plaster products operation way:
Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping.Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3� mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
RTV molding silicone rubber for plaster products frequently asked question:
Why is the silicone rubber mold oily?
Basically, molding silicone rubber doesn't contain any oil, so it won't be oily. The reasons for the oily molds can be deducted from the below 3 factors:
1. Added white oil, which is the compound of silicone oil and white oil. The white oil is not silicone oil but a kink of petrochemicals;
2. Added too much silicone oil. Normally, we donot advise our customers to add any silicone oil into silicone rubber. If necessary, the ratio must be 5%-10%;
Any further information required ,pls feel free to contact Miss Vicky and call the mobile of 0086-18938867593 or the phone 0086-755-89212369. Welcome to visit www(dot)szrl(dot)net anytime .
|
| Company: |
Hong Ye Jfge Technology Co., Ltd.
|
| Contact: |
Ms. vicky pan |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street |
| Postcode: |
518117 |
| Tel: |
86-0755-89212382 |
| Fax: |
86-0755-89948030 |
| E-mail: |
|
|
|
|
Home
